10 December 2014 780W narrow linewidth all fiber laser with sinusoidal phase modulation
Author Affiliations +
Abstract
In high power fiber laser, the limiting factor of narrow linewidth output is analyzed. The influence of Stimulated Brillouin scattering effect and sinusoidal phase modulation suppressing method are studied. The linewidth of a single frequency laser is broadened from 1MHz to 2.9 GHz by sinusoidal phase modulation technology. The output power of single frequency laser is 50mW. And through three stage fiber amplified, the central wavelength of 1064.34nm, linewidth of 2.9 GHz and power of 780W are achieved respectively. The optical-optical efficiency is 79%. And the beam quality is [see manuscript] and [see manuscript]. The distributing characteristic of longitudinal mode, under every modulating coefficient, is measured. And the result is the same as theoretical result. The increasing of longitudinal mode number, controlling of longitudinal mode spacing and reducing power spectrum density by sinusoidal phase modulation are proved to be viable. Then Stimulated Brillouin Scattering threshold is increased. Finally, the output power is increased a lot. The output power of this laser is only limited by pump power. If the pump power is increased, the higher power of narrow linewidth fiber laser will be achieved.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Liming Zhang, Liming Zhang, Shouhuan Zhou, Shouhuan Zhou, Hong Zhao, Hong Zhao, Kun Zhang, Kun Zhang, Jinping Hao, Jinping Hao, Dayong Zhang, Dayong Zhang, Chen Zhu, Chen Zhu, Yao Li, Yao Li, Xiongfei Wang, Xiongfei Wang, Nianjiang Chen, Nianjiang Chen, } "780W narrow linewidth all fiber laser with sinusoidal phase modulation", Proc. SPIE 9266, High-Power Lasers and Applications VII, 92660F (10 December 2014); doi: 10.1117/12.2074573; https://doi.org/10.1117/12.2074573
PROCEEDINGS
11 PAGES


SHARE
Back to Top