Translator Disclaimer
Paper
18 November 2014 High-power continuous-wave ytterbium-doped fiber oscillator at 1018 nm
Author Affiliations +
Abstract
We have demonstrated a 1018 nm continuous wave fiber oscillator pumped by LDs operating at 976 nm. Three kinds of Ytterbium-doped dual-clad fibers, 15/130 μm fiber, 25/250 μm fiber and 30/250 μm fiber, are employed separately in the experiments. We achieve 67 W total output power with the 15/130 μm fiber for 100 W of pump power with a slope efficiency of 67%. And with the 25/250 μm fiber, 276 W total output power is generated for 372 W of pump power with a slope efficiency of 74%. In the end, 300 W output power with the slope efficiency of 81% is successfully achieved with the 30/250 μm fiber for 372 W of pump power. To the best of our knowledge, this is the highest output ever reached by a dual-clad fiber oscillator at this wavelength that ever reported in open detail.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Renli Zhang, Yuhao Xue, Hong Zhang, Xiaobo Feng, Wupeng Gong, and Yong Bi "High-power continuous-wave ytterbium-doped fiber oscillator at 1018 nm", Proc. SPIE 9266, High-Power Lasers and Applications VII, 92661E (18 November 2014); https://doi.org/10.1117/12.2071285
PROCEEDINGS
5 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

High power Yb-doped fiber laser operates at special wavelength
Proceedings of SPIE (September 17 2013)
Development of double-clad fiber lasers
Proceedings of SPIE (September 05 2002)
Modeling of 2 um Tm Ho ZBLAN diode pumped cw...
Proceedings of SPIE (April 24 1996)
Design and realization of high-power DFB lasers
Proceedings of SPIE (December 20 2004)

Back to Top