Translator Disclaimer
18 November 2014 All-fiber designed narrow line-width 1.55μm double cladding fiber lasers
Author Affiliations +
To develop 1.55μm high power lasers with compactness, narrow spectral line-width and high wavelength stability suitable for practical applications, EY-DCFLs built in all-fiber configuration are investigated. The experimental setups are composed of Er3+/Yb3+ co-doped double-clad gain fiber, multimode 976nm pump laser diode, double-clad fiber Bragg gratings (FBGs) and (1+1)x1 side pump couplers. FBGs with different reflectivity are applied as output reflectors, and forward-pump scheme and backward-pump scheme are performed respectively. As the efficiency and the spectral stability are considered simultaneously, EY-DCFL with low reflective FBG mirror and in backward-pump manner is more desirable. In the optimized all-fiber EY-DCFL, the maximum output power with an optical-optical efficiency of more than 17% is up to 1.5 W, and the wavelength is defined at 1550.8nm with a line-width about 0.03nm.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hongxin Su, Zhiyang Wu, and Lijing Xu "All-fiber designed narrow line-width 1.55μm double cladding fiber lasers", Proc. SPIE 9266, High-Power Lasers and Applications VII, 92661F (18 November 2014);


Single mode 1018nm fiber laser with power of 230W
Proceedings of SPIE (March 11 2016)
High power All Fiber components the missing link for...
Proceedings of SPIE (June 07 2004)
High brightness fiber coupled pump sources at 88X nm and...
Proceedings of SPIE (February 23 2009)
Design of pumping system for high-power fiber laser
Proceedings of SPIE (December 05 2005)
Optimum design of DBR Er Yb co doped double cladding...
Proceedings of SPIE (November 16 2010)

Back to Top