|
Diode-pumped solid-state lasers are high efficiency, long lifetime, compact and reliable, so they have been covering a wide
range of applications. Thermal effect is a major limiting factor in scaling the average power of high-power solid-state lasers,
so it is a critical issue in designing diode-pumped solid-state lasers. The uniform pump intensity distribution in laser rod
can weaken the influence of thermal effects in laser, and the research of improving the pump distribution uniformity has
attracted a great deal of attention. People usually establish a model of single diode-bar pumped laser rod to calculate the
distribution. However, for diode-array pumped high-power lasers, the model is limited and has deviation with the actual
pump distribution, which cannot reflect the real working conditions in the laser.
In this paper, the theoretical model of diode-array pumped laser rod is built. Based on the actual working environment of
diode-array side-pumped Tm:YAG laser rod, the expression of pump intensity distribution in the laser medium is deduced.
Additionally, the influence of total pump power, pump structure, Tm:YAG rod characteristic parameters and pump beam
radius on pump intensity distribution are simulated and analyzed. Moreover, the parameters are optimized in order to
obtain the optimistic results which are efficient to improve the uniformity of pump distribution. The results show that when
the pumping distance from diode-array to the rod’s surface is 3mm, the distance between two rows of diode-bars is 1mm,
the absorption coefficient is 330m-1,the pump beam width is 2.5mm,the pump intensity distribution of five-way pumped
laser rod is improved, and then the thermal effects could be weakened. The presented results can provide theoretical
guidance to design and optimization of high-power lasers.
|
