24 October 2014 Optically powered active sensing system for Internet Of Things
Author Affiliations +
Abstract
Internet Of Things (IOT) drives a significant increase in the extent and type of sensing technology and equipment. Sensors, instrumentation, control electronics, data logging and transmission units comprising such sensing systems will all require to be powered. Conventionally, electrical powering is supplied by batteries or/and electric power cables. The power supply by batteries usually has a limited lifetime, while the electric power cables are susceptible to electromagnetic interference. In fact, the electromagnetic interference is the key issue limiting the power supply in the strong electromagnetic radiation area and other extreme environments. The novel alternative method of power supply is power over fiber (PoF) technique. As fibers are used as power supply lines instead, the delivery of the power is inherently immune to electromagnetic radiation, and avoids cumbersome shielding of power lines. Such a safer power supply mode would be a promising candidate for applications in IOT. In this work, we built up optically powered active sensing system, supplying uninterrupted power for the remote active sensors and communication modules. Also, we proposed a novel maximum power point tracking technique for photovoltaic power convertors. In our system, the actual output efficiency greater than 40% within 1W laser power. After 1km fiber transmission and opto-electric power conversion, a stable electric power of 210mW was obtained, which is sufficient for operating an active sensing system.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chen Gao, Chen Gao, Jin Wang, Jin Wang, Long Yin, Long Yin, Jing Yang, Jing Yang, Jian Jiang, Jian Jiang, Hongdan Wan, Hongdan Wan, } "Optically powered active sensing system for Internet Of Things", Proc. SPIE 9270, Optoelectronic Devices and Integration V, 927016 (24 October 2014); doi: 10.1117/12.2071724; https://doi.org/10.1117/12.2071724
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

Ultra-thin sensor array for 3D curvature sensing
Proceedings of SPIE (March 27 2015)
Hybrid power systems for autonomous MEMS
Proceedings of SPIE (August 16 2001)
Low-cost outdoor solar cells in-line measurement with Zigbee
Proceedings of SPIE (November 30 2011)
Photovoltaic efficiency measurements
Proceedings of SPIE (November 03 2004)
Electric power supply sourced from within fiber optic cable
Proceedings of SPIE (September 28 2005)

Back to Top