In order to avoid the defects of contact measurement, such as limited range, complex constructing and disability of 3-D parameter acquisition, we built a binocular videogrammetric system for measuring 3-D geometry parameters of wind tunnel test models, for instance, displacement, rotation angle and vibration, in low-speed wind tunnel. The system is based on the principles of close-range digital photogrammetry. As a non-contact system, it acquires parameters without interference in the experiments, and it has adjustable range and simple structure. It is worth mentioning that this is a Realtime measurement system, so that it can greatly compress the experiment period, furthermore, it is also able to provide some specific experiments with parameters for online adjustment. In this system, images are acquired through two industrial digital cameras and a PCI-E image acquisition card, and they are processed in a PC. The two cameras are triggered by signals come from a function signal generator, so that images of different cameras will have good temporal synchronization to ensure the accuracy of 3-D reconstruction. A two-step stereo calibration technique using planar pattern developed by Zhengyou Zhang is used to calibrate these cameras. Results of wind tunnel test indicate that the system can provide displacement accuracy better than 0.1% and rotation angle accuracy better than 0.1 degree, besides, the vibration frequency accuracy is superior to 0.1Hz in the low-frequency range.