You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
13 November 2014Ex-situ preparation of high-conductive polymer/SWNTs nanocomposites for structure fabrication
This paper reports ex-situ preparation of conductive polymer/single-walled carbon nanotubes (SWNTs) nanocomposites by adding high conductive SWNTs to the polymer matrix. Sonication methods were used to disperse the SWNTs in the polymer. The conductivity of the nanocomposites is tuned by increasing the concentration of SWNTs. Furthermore, we present two-photon polymerization (2PP) method to fabricate structures on the basis of conductive photosensitive composites. The conductive structures were successfully generated by means of 2PP effect induced by a femtosecond laser.
The alert did not successfully save. Please try again later.
Qingchuan Guo, Reza Ghadiri, Thomas Weigel, Andreas Aumann, Evgeny L. Gurevich, Cemal Esen, Yan Li, Wei Cheng, Boris Chichkov, Andreas Ostendorf, "Ex-situ preparation of high-conductive polymer/SWNTs nanocomposites for structure fabrication," Proc. SPIE 9277, Nanophotonics and Micro/Nano Optics II, 927714 (13 November 2014);