2 September 2014 Test and study on mirror quality of ultra-precision diamond turning
Author Affiliations +
Proceedings Volume 9280, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes; 928013 (2014) https://doi.org/10.1117/12.2069634
Event: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2014), 2014, Harbin, China
Abstract
Using the diamond turning lathe and mono crystalline diamond tool, the aluminum alloy of 2A12 was cut under different cutting parameters including cutting speed, feed rate and depth of cut and the mirror surfaces were made. The surface roughness, micro hardness and residual stress of the mirror surface were tested by the surface profiler, the universal hardness tester and X-stress Robot. The influences of the cutting parameters on the mirror quality were studied. The research results have theoretical and practical significance to the selection of the optimal cutting parameters in ultraprecision diamond turning.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yanyan Chang, Tao Sun, Zengqiang Li, Baosen Wu, "Test and study on mirror quality of ultra-precision diamond turning", Proc. SPIE 9280, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 928013 (2 September 2014); doi: 10.1117/12.2069634; https://doi.org/10.1117/12.2069634
PROCEEDINGS
6 PAGES


SHARE
Back to Top