20 August 2014 Front Matter: Volume 9281
Proceedings Volume 9281, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 928101 (2014) https://doi.org/10.1117/12.2081422
Event: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2014), 2014, Harbin, China
Abstract
This PDF file contains the front matter associated with SPIE Proceedings Volume 9281, including the Title Page, Copyright information, Table of Contents, Invited Panel Discussion, and Conference Committee listing.
Yang, Ruch, and Li: Front Matter: Volume 9281

The papers included in this volume were part of the technical conference cited on the cover and title page. Papers were selected and subject to review by the editors and conference program committee. Some conference presentations may not be available for publication. The papers published in these proceedings reflect the work and thoughts of the authors and are published herein as submitted. The publisher is not responsible for the validity of the information or for any outcomes resulting from reliance thereon.

Please use the following format to cite material from this book:

Author(s), “Title of Paper,” in 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, edited by Li Yang, Eric Ruch, Shengyi Li, Proceedings of SPIE Vol. 9281 (SPIE, Bellingham, WA, 2014) Article CID Number.

ISSN: 0277-786X

ISBN: 9781628413564

Published by

SPIE

P.O. Box 10, Bellingham, Washington 98227-0010 USA

Telephone +1 360 676 3290 (Pacific Time) · Fax +1 360 647 1445

SPIE.org

Copyright © 2014, Society of Photo-Optical Instrumentation Engineers.

Copying of material in this book for internal or personal use, or for the internal or personal use of specific clients, beyond the fair use provisions granted by the U.S. Copyright Law is authorized by SPIE subject to payment of copying fees. The Transactional Reporting Service base fee for this volume is $18.00 per article (or portion thereof), which should be paid directly to the Copyright Clearance Center (CCC), 222 Rosewood Drive, Danvers, MA 01923. Payment may also be made electronically through CCC Online at copyright.com. Other copying for republication, resale, advertising or promotion, or any form of systematic or multiple reproduction of any material in this book is prohibited except with permission in writing from the publisher. The CCC fee code is 0277-786X/14/$18.00.

Printed in the United States of America.

Publication of record for individual papers is online in the SPIE Digital Library.

00001_psisdg9281_928101_page_2_1.jpg

Paper Numbering: Proceedings of SPIE follow an e-First publication model, with papers published first online and then in print and on CD-ROM. Papers are published as they are submitted and meet publication criteria. A unique, consistent, permanent citation identifier (CID) number is assigned to each article at the time of the first publication. Utilization of CIDs allows articles to be fully citable as soon as they are published online, and connects the same identifier to all online, print, and electronic versions of the publication. SPIE uses a six-digit CID article numbering system in which:

  • The first four digits correspond to the SPIE volume number.

  • The last two digits indicate publication order within the volume using a Base 36 numbering system employing both numerals and letters. These two-number sets start with 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 0A, 0B … 0Z, followed by 10-1Z, 20-2Z, etc.

The CID Number appears on each page of the manuscript. The complete citation is used on the first page, and an abbreviated version on subsequent pages. Numbers in the index correspond to the last two digits of the six-digit CID Number.

Symposium Committee

Honorary Chair

  • Bingkun Zhou, Chinese Optical Society (China)

Symposium General Chair

  • Liwei Zhou, Beijing Optical Society (China)

Symposium General Co-chairs

  • Jianlin Cao, Ministry of Science and Technology of China

  • H. Philip Stahl, NASA Marshall Space Flight Center (United States)

  • Yudong Zhang, Institute of Optics and Electronics (China)

  • Larry Stepp, Thirty Meter Telescope Project (United States)

  • Yingchun Liang, Harbin Institute of Technology (China)

  • Yu Yao, Harbin Engineering University (China)

International Academic Committee

  • Wenhan Jiang, Chair, Chinese Academy of Engineering (China)

  • Liwei Zhou, Chinese Academy of Engineering (China) and Beijing Institute of Technology (China)

  • Harald Giessen, University of Stuttgart (Germany)

  • Junhua Pan, Chinese Academy of Engineering (China) and Soochow University (China)

  • Myung K. Cho, National Optical Astronomy Observatory (United States)

Organizing Committee

  • Yudong Zhang, Co-chair, IOE, CAS (China)

  • Jinghua Cao, Co-chair, Bureau of International Cooperation, CAS (China)

  • Libin Xiang, Co-chair, Shanghai Engineering Center for Microsatellites (China)

  • Yadong Jiang, Co-chair, University of Electronic Science and Technology (China)

Program Committee

  • Xiangdi Lin, Chair, Chinese Academy of Engineering (China)

  • Hu Yang, Co-chair, IOE, CAS (China)

  • Wei Gao, Co-chair, Tohoku University (Japan)

  • Huadong Yu, Co-chair, Changchun University of Science and Technology (China)

Secretary General of the Symposium

  • Li Yang, Committee of Optical Manufacturing Technology, COS (China)

Session Chairs

  • Session 1-1 Fan Wu

  • Session 2-1 Qiming Xin

  • Session 3-1 Shangming Wen

  • Session 4-1 Tingwen Xin

  • Session 5-1 Xiao Wang

  • Session 6-1 Xiangang Luo

  • Session 1-2 Bin Fan

  • Session 2-2 Shengyi Li

  • Session 3-2 Rongzhu Zhang

  • Session 4-2 Qingliang Zhao

  • Session 5-2 Yige Qi

  • Session 6-2 Changtao Wang

Introduction

The 7th International Symposium on Advanced Optical Manufacturing and Testing Technology (AOMATT) was held 26–29 April 2014 at the Harbin International Conference Center, China.

AOMATT 2014 was kicked off with a formal opening ceremony. The ceremony started with the introduction of VIP guests, symposium chairs, conference chairs, and plenary speakers, followed by opening speeches by Prof. Liwei Zhou, AOMATT 2014 Symposium Chairman, Prof. Bin Xu, Vice President of IOE, a sponsor of AOMATT 2014, and Prof. Yingchun Liang, Assistant President of Harbin Institute of Technology, a local co-sponsor of AOMATT 2014. Dr. H. Philip Stahl, 2014 President of SPIE, technical cosponsor of AOMATT 2014, could not attend the symposium this year due to a schedule conflict, but sent his congratulation letter. In his letter, Dr. Stahl gave high marks for AOMATT and stated:

AOMATT is a very successful collaboration between SPIE, the Institute of Optics and Electronics of the Chinese Academy of Sciences, and the Chinese Optical Society. It has become a well-known international symposium on advanced optical manufacturing and testing technologies. The vision of AOMATT is closely aligned with SPIE’s mission to promote optics and photonics around the world.

All of the conference sponsors and attendees greatly appreciate SPIE and Dr. Stahl’s long-standing support of AOMATT since its inception in 2002.

The plenary sessions started immediately after the conclusion of the opening ceremony. There were a total of nine plenary presentations: Dr. Larry Stepp, Telescope Department Head for the Thirty Meter Telescope (TMT) Project, USA, presented “Manufacturing the Optics for the Thirty Meter Telescope”; Dr. Bernard Delabre, Optical Design Engineer of European Southern Observatory (ESO), Germany, presented “The Progress of the European Extremely Large Telescope”; Dr. Tao Sun, Director of the Centre for Precision Engineering(CPE) of Harbin Institute of Technology, presented “Method and procedure for the highefficiency and ultra-precision diamond turning of large optical mirrors”; Dr. Wei Gao, Professor and Director of Research Center for Precision Nanosystems, Dept. of Nanomechanics of Tohoku University, Japan, presented “Precision nanometrology for fabrication of micro optics”; Dr. Xuejun Zhang, Vice President of Changchun Institute of Optics, Fine Mechanics and Physics (CIOMP), CAS, presented “Advanced manufacturing and testing technologies for multiple mirror space telescopes”; Dr. A.G. Poleshchuk, Head of the Laboratory of Diffractive Optics, and Dr. Victor P. Korolkov, senior scientist of Institute of Automation and Electrometry, Siberian Branch of Russian Academy of Sciences, Novosibirsk, Russia, presented “Diffractive optical elements: fabrication and application”; Dr. Axel Schindler, Science and Technology Consultant of Leibniz Institute of Surface Modification (IOM), Germany, presented “Advanced ion beam finishing and atmospheric plasma technology for high end optics”; Dr. Harald Giessen, Chair for Ultrafast Nano-Optics in the Department of Physics at the University of Stuttgart, Germany, presented “Complex hybrid plasmonics: new materials and new functionalities”; Dr. Xiangang Luo, Director of State Key Laboratory of Optical Technologies on Nano-Fabrication and Micro-Engineering of Institute of Optics and Electronics, CAS, presented “Manipulating the polarization states of electromagnetic waves using subwavelength structures”. More than 600 people attended the opening ceremony and the full-day plenary sessions.

More than 400 oral and poster papers were selected for AOMATT 2014. About 102 oral papers were presented in six parallel conference sessions on 27 April. A special Technical Workshop was held in the morning of 28 April. An all-symposium poster session was held in the afternoon of 28 April. Authors and attendees had active discussions and exchange of ideas throughout the symposium. Many papers presented cutting-edge research and development work in optical design, manufacturing, and testing. The success of AOMATT 2014 continued the tradition of focus and excellence of this biannual international topical symposium in China.

We would like to express our sincere appreciation to COS—The Chinese Optical Society, IOE—Institute of Optics and Electronics, Chinese Academy of Sciences, and to SPIE for sponsoring and supporting AOMATT 2014. We would like to thank all chairs, committee members, authors, and attendee for their contributions to the symposium and sharing their research with colleagues around the world.

The 8th AOMATT is planned for 2016, and we look forward to seeing everyone at AOMATT 2016. Please watch for the Call for Papers and symposium announcements on the SPIE, IOE and COS web sites.

Li Yang

Secretary General, AOMATT 2014

AOMATT 2014 SPONSORS

Sponsored by

COS—The Chinese Optical Society

00001_psisdg9281_928101_page_17_1.jpg

IOE—Institute of Optics and Electronics, Chinese Academy of Sciences

00001_psisdg9281_928101_page_17_2.jpg

Technical Cosponsor SPIE

00001_psisdg9281_928101_page_17_3.jpg

Supporting Organizations

Ministry of Science and Technology of China

Chinese Academy of Sciences

National Natural Science Foundation of China

Cooperating Organizations

Harbin Institute of Technology (China) • Harbin Engineering University (China) • National University of Defense Technology (China) • University of Electronic Science and Technology of China • Sichuan University (China) • Sichuan Optical Society • State Key Laboratory of Optical Technologies on Nano-Fabrication and Micro-Engineering, IOE, CAS • Key Laboratory of Adaptive Optics, IOE, CAS • Changchun Institute of Optics, Fine Mechanics and Physics (China) • Beijing Institute of Technology (China) • Changchun University of Science and Technology (China)

© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
"Front Matter: Volume 9281", Proc. SPIE 9281, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 928101 (20 August 2014); doi: 10.1117/12.2081422; https://doi.org/10.1117/12.2081422
PROCEEDINGS
18 PAGES


SHARE
Back to Top