6 August 2014 The method test of transition mirror method to process sphere output mirror with large radius curvature
Author Affiliations +
Proceedings Volume 9281, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 928117 (2014) https://doi.org/10.1117/12.2069919
Event: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2014), 2014, Harbin, China
Abstract
This paper introduces the general requirements of parameter indexes about sphere output mirror with large radius curvature mainly including: sphere radius,spherical area,coaxiality,surface defect disease,RMS value and so on. The difficulties that ultra-smooth machining for sphere output mirror were indicated. A “plano-convex” structure has been designed for transition chip to solving the problem that roughcast and tool pad can’t directly processed by the matrix angles using optical cement method. Based on the sphere output mirror’s process feature, the processing plan to polish sphere surface and then to process platform was laid down. The purpose of this article is to control the test process to get to the target of the “transition chip” method by using “the design and produce of transition chip”,“the conservation of super smooth” and the “control process”, after testing on relative indicators of sphere output mirror, it prove that “transition chip” method can be applied to sipper smooth polish in sphere output mirror with large radius of curvature.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dongxu Wu, Dongxu Wu, Yi Tong, Yi Tong, Weijin Guo, Weijin Guo, Lingyan Jiao, Lingyan Jiao, Yuzhu Jin, Yuzhu Jin, } "The method test of transition mirror method to process sphere output mirror with large radius curvature", Proc. SPIE 9281, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 928117 (6 August 2014); doi: 10.1117/12.2069919; https://doi.org/10.1117/12.2069919
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Active optics and the axisymmetric case MINITRUST wide field...
Proceedings of SPIE (September 24 2004)
Polishing And Aspherizing A 1.8-m f/2.7 Paraboloid
Proceedings of SPIE (January 29 1989)
Bend-And-Polish Fabrication Techniques
Proceedings of SPIE (October 22 1985)

Back to Top