You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
6 August 2014Analysis of composite flow field characteristics in fluid jet polishing
Fluid jet polishing is an effective ultra-smooth surface processing technology. It can be targeted to remove high-frequency surface defects. Removal efficiency is directly related to the speed of flow field, therefore it is necessary to further analyze the composite flow field distribution characteristics. Aiming at the characteristics of composite flow field, theoretical and modeling research was conducted. FLUENT is used to simulate composite jet flow field. The fluid jet velocity and pressure distribution curve on the workpiece wall have been obtained.
Rongzhu Zhang,Yinchuan Luo,Xiulong Li, andYang Zhang
"Analysis of composite flow field characteristics in fluid jet polishing", Proc. SPIE 9281, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 92811O (6 August 2014); https://doi.org/10.1117/12.2068001
The alert did not successfully save. Please try again later.
Rongzhu Zhang, Yinchuan Luo, Xiulong Li, Yang Zhang, "Analysis of composite flow field characteristics in fluid jet polishing," Proc. SPIE 9281, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 92811O (6 August 2014); https://doi.org/10.1117/12.2068001