6 August 2014 Simulation on turning aspheric surface method via oscillating feed
Author Affiliations +
Proceedings Volume 9281, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 92812C (2014) https://doi.org/10.1117/12.2069457
Event: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2014), 2014, Harbin, China
Abstract
It is quite difficult to manufacturing optical components, the combination of high gradient ellipsoid and hyperboloid, with high machining surface requirements. To solve the problem, in this paper we present a turning and forming method via oscillating feed of R-θ layout lathe, analyze machining ellipsoid segment and hyperboloid segment separately through oscillating feed. Also calculate parameters on each trajectory during processing respectively and obtain displacement, velocity, acceleration and other parameters. The simulation result shows that this rotary turning method is capable of ensuring that the cutter is on the equidistance line of meridian cross section curve of work piece during processing high gradient aspheric surface, which helps getting high quality surface. Also the method provides a new approach and a theory basis for manufacturing high quality aspheric surface and extending function of the available twin-spindle lathe as well.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fanxing Kong, Zengqiang Li, Tao Sun, "Simulation on turning aspheric surface method via oscillating feed", Proc. SPIE 9281, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 92812C (6 August 2014); doi: 10.1117/12.2069457; https://doi.org/10.1117/12.2069457
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Deterministic finishing of aspheric optical components
Proceedings of SPIE (October 15 2013)
A novel in-situ measuring technique for aspheric surface
Proceedings of SPIE (November 28 2011)
Precision Machined Optics: A DOD Committee Report
Proceedings of SPIE (May 04 1978)
Diamond machining of flats, spherics, and aspherics
Proceedings of SPIE (October 01 1990)

Back to Top