6 August 2014 Research on the design of surface acquisition system of active lap based on FPGA and FX2LP
Author Affiliations +
Proceedings Volume 9281, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 92812T (2014) https://doi.org/10.1117/12.2071189
Event: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2014), 2014, Harbin, China
Abstract
In order to research the dynamic surface shape changes of active lap during the processing, this paper introduces a dynamic surface shape acquisition system of active lap using FPGA and USB communication. This system consists of high-precision micro-displacement sensor array, acquisition board, PC computer composition, and acquisition circuit board includes six sub-boards based on FPGA, a hub-board based on FPGA and USB communication. A sub-board is responsible for a number of independent channel sensors’ data acquisition; hub-board is responsible for creating encoder simulation tools to active lap deformation control system with location information, sending synchronization information to latch the sensor data in all of the sub-boards for a time, while addressing the sub-boards to gather the sensor data in each sub-board one by one and transmitting all the sensor data together with location information via the USB chip FX2LP to the host computer. Experimental results show that the system is capable of fixing the location and speed of active lap, meanwhile the control of surface transforming and dynamic surface data acquisition at a certain location in the processing is implemented.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hongshen Zhao, Hongshen Zhao, Xiaojin Li, Xiaojin Li, Bin Fan, Bin Fan, Zhige Zeng, Zhige Zeng, } "Research on the design of surface acquisition system of active lap based on FPGA and FX2LP", Proc. SPIE 9281, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 92812T (6 August 2014); doi: 10.1117/12.2071189; https://doi.org/10.1117/12.2071189
PROCEEDINGS
5 PAGES


SHARE
RELATED CONTENT

Design of acoustic emission monitoring system based on VC++
Proceedings of SPIE (December 03 2015)
The performances of the GTC secondary mirror drive unit
Proceedings of SPIE (September 29 2004)
Design of embedded endoscopic ultrasonic imaging system
Proceedings of SPIE (January 28 2009)
UKIRT remote operations fail-safe system
Proceedings of SPIE (September 24 2012)
Design of a mechatronic bearing through sensor integration
Proceedings of SPIE (December 17 1998)

Back to Top