2 September 2014 BBO crystal component design for ultra-short laser pulse measurement
Author Affiliations +
Proceedings Volume 9284, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optoelectronics Materials and Devices for Sensing and Imaging; 92840B (2014) https://doi.org/10.1117/12.2070852
Event: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2014), 2014, Harbin, China
Abstract
In this paper the mechanism of BBO crystal component for frequency resolved optical gating technique has been researched by mathematical modeling and Simulation. Research shows that thickness of the crystal and the phase matching angle are important parameters affecting the measurement performance. Crystal thickness determines the pulse width limit which this crystal can distinguish; when the phase condition is matched between the fundamental frequency and second-harmonic of light, the SHG efficiency of incident light is highest. According to the calculations, An BBO crystals with 3.5mm thickness, 20.56 degrees phase matching angle is adopted to realize the crystal component for tens to hundreds of femtoseconds pulse width measurement.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yudong Jia, Xiaoqing Zhang, Tianyi Zhang, Lingling Lu, "BBO crystal component design for ultra-short laser pulse measurement", Proc. SPIE 9284, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optoelectronics Materials and Devices for Sensing and Imaging, 92840B (2 September 2014); doi: 10.1117/12.2070852; https://doi.org/10.1117/12.2070852
PROCEEDINGS
6 PAGES


SHARE
Back to Top