25 November 2014 Analysis of laser cutting speed influence on the surface quality and shape deviation of steel parts
Author Affiliations +
Proceedings Volume 9290, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2014; 929011 (2014) https://doi.org/10.1117/12.2070200
Event: Symposium on Photonics Applications in Astronomy, Communications, Industry and High-Energy Physics Experiments, 2014, Warsaw, Poland
Abstract
The results of laser cutting speed influence on the quality of machined surface, defined by the Ra roughness parameter and the shape errors, in case of machining two types of steel: i) P265GH, ii) 1.4307 are presented in the paper. Two CO2 laser cutters with maximum power of the laser beam 4000W and 3200W were used for the investigation. The characteristics of the roughness parameter Ra depending on the laser cutting speed vc are presented. The diagrams of shape deviation of the machined specimens for the greatest and lowest values of the Ra for the both laser cutters are also presented. The deviation values from the theoretical profile of the particular samples, taking into account the type of the cut-out shape profiles (circular, linear) are calculated.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. Kowalczyk, W. Zębala, "Analysis of laser cutting speed influence on the surface quality and shape deviation of steel parts", Proc. SPIE 9290, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2014, 929011 (25 November 2014); doi: 10.1117/12.2070200; https://doi.org/10.1117/12.2070200
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

Effect of the focal plane position on CO2 laser beam...
Proceedings of SPIE (November 11 2016)
Applications of the powerful CO2-lasers
Proceedings of SPIE (April 04 1997)
Low Power CO[sub]2[/sub]
Proceedings of SPIE (March 16 1989)
CO2 Laser Market
Proceedings of SPIE (March 16 1989)

Back to Top