18 December 2014 Infrared transparent conductive films
Author Affiliations +
This paper presents results for films of CuAlxOy were deposited on the sapphire by reactive magnetron co-sputtering using DC applied to the high-purity Cu target,RF applied to the high-purity Al target.Copper aluminum oxide film (CuAlxOy) is transparent for infrared and conductive. The properties of the films are influenced by the power of sputtering,the thickness of films etc. deposition parameters. It has been found that, by fine-tuning the sputtering parameters, the films with both reasonably low resistance and high transmission can be obtained simultaneously.The relationship between the process parameters and the properties of the films were established, the process parameters is very important for preparation of the films later.The relationship between the average transmittance, electrical conductivity and thickness of the films etc. parameters were set up.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fei Tao, Fei Tao, Wei-guo Sun, Wei-guo Sun, Liang Zhang, Liang Zhang, Li-wen Wang, Li-wen Wang, Lei Zhang, Lei Zhang, Xu-bo Zhu, Xu-bo Zhu, } "Infrared transparent conductive films", Proc. SPIE 9295, International Symposium on Optoelectronic Technology and Application 2014: Laser Materials Processing; and Micro/Nano Technologies, 929508 (18 December 2014); doi: 10.1117/12.2072889; https://doi.org/10.1117/12.2072889


TaNx and Ta/graded Ta(N)/TaN multilayer diffusion barriers
Proceedings of SPIE (December 17 2014)
The preparation of AZO films with RF sputtering
Proceedings of SPIE (March 11 2008)
Ion beam milling of thin films for optical fabrication
Proceedings of SPIE (January 31 1994)
Infrared transparent conductive oxides
Proceedings of SPIE (September 06 2001)
Intrinsic Mechanical Stresses In Sputtered Aluminium Films
Proceedings of SPIE (February 26 1989)

Back to Top