Translator Disclaimer
3 December 2014 Design of high temperature adaptability cassegrain collimation system
Author Affiliations +
Collimation system is an indispensable part of the photoelectric detection equipment. Aimed at meeting the demand of field on-line detection for photoelectric system, the system must have higher requirements for its volume, quality and the anti-interference ability of all sorts of complex weather conditions. In order to solve this problem, this paper designed a kind of high temperature adaptability reflex cassegrain collimation system. First the technical indexes of the system was put forward according to the requirements of practical application, then the initial structure parameters was calculated by gaussian optical computing and optimized processing through Zemax. The simulation results showed that the MTF of the system was close to the diffraction limit, which had a good image quality. The system structure tube adopted hard steel material; the primary mirror and secondary mirror used low expansion coefficient of microcrystalline glass, which effectively reduced the deformation due to temperature difference and remained little change in quality and volume at the same time. The experiment results in high and low temperature environments also showed that the collimation system could keep within 30 "beam divergence angle, which proved to have good temperature adaptability, so that it can be used in the field of complex bad conditions.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhibin Chen, Yan Song, Xianhong Liu, and Wenjian Xiao "Design of high temperature adaptability cassegrain collimation system", Proc. SPIE 9297, International Symposium on Optoelectronic Technology and Application 2014: Laser and Optical Measurement Technology; and Fiber Optic Sensors, 92971B (3 December 2014);

Back to Top