Geosyncronous imager thermal balance test and thermal model modification

Bingting Hu; Yaohai Dong; Ganquan Wang; Shichen Jiang

doi:10.1117/12.2071286

18 November 2014 Geosyncronous imager thermal balance test and thermal model modification

Bingting Hu, Yaohai Dong, Ganquan Wang, Shichen Jiang

Proceedings Volume 9298, International Symposium on Optoelectronic Technology and Application 2014: Imaging Spectroscopy; and Telescopes and Large Optics; 929819 (2014) https://doi.org/10.1117/12.2071286
Event: International Symposium on Optoelectronic Technology and Application 2014, 2014, Beijing, China

Abstract

The multi-channel scanning imager is one of the main payloads of a Geostationary earth orbit satellite of China, which observe multi spectrum from earth. Passive thermal control was applied to decrease temperature rise when solar intrusion at midnight, and heat compensation was made to decrease thermal fluctuation in one orbit. Effort was focused on the scanning mechanism for its relatively strict temperature gradient requirement. In order to validate thermal control scheme, thermal balance experiment scheme was planned. Considering the complexity of solar heat flux into sunshade, solar simulator was used to precisely simulate the heat flux variation. Limited to the dimension of vacuum chamber and solar simulator lamp, only the flux into sunshade was simulated by solar simulator, and other parts was simulated by electrical heaters. The solar illuminated region was analysed in order to keep the total heat flux correct. Detailed test process was figured out to carry out two kinds of heat flux simulation. Date were acquired and compared to thermal analysis. Based on experiment condition, thermal model was constructed and modified. From analysis of all the effecting factors, it is find that thermal contact resistance between heatpipes and heat dissipating plate can largely effect the temperature of scanning mechanism. Thermal model of scanning mechanism was detailly constructed including features effecting heat flux absorption and temperature distribution. After modification, the prediction ability of thermal model was enhanced. And optimization of thermal design was made to decrease temperature level and gradient of scanning mechanism. Thermal analyse was done to estimate the optimization, and its effectiveness was validated.

Citation Download Citation

Bingting Hu, Yaohai Dong, Ganquan Wang, and Shichen Jiang "Geosyncronous imager thermal balance test and thermal model modification", Proc. SPIE 9298, International Symposium on Optoelectronic Technology and Application 2014: Imaging Spectroscopy; and Telescopes and Large Optics, 929819 (18 November 2014); https://doi.org/10.1117/12.2071286

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
6 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Heat flux

Imaging systems

Thermal modeling

Mirrors

Data modeling

Thermal analysis

Optimization (mathematics)

Show All Keywords

Keywords/Phrases

Search In:

Publication Years