18 November 2014 Stray light analysis of large aperture optical telescope using TracePro
Author Affiliations +
Abstract
In order to verify the effect of stray light elimination design, the detailed stray light analysis of one modified large aperture optical telescope using TracePro is described in this paper. Firstly, the sources of stray light in optical telescope and the influence of stray light on optical telescope are introduced. Then, the principle of stray light analysis using TracePro is presented. The solid model, surface properties and light paths of the modified large aperture optical telescope are determined. Ray splitting and importance sampling are adopted to ensure the calculation accuracy and reduce the time consumption. The Point Source Normalized Irradiance Transmittance (PSNIT) curve of the system is plotted. It shows the PSNITs are less than 10-12 when off-axis angles are larger than 30°, which satisfies the requirement of the system. Finally, the several special fields of stray light control are discussed.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Cheng-ming Sun, Cheng-ming Sun, Fei Zhao, Fei Zhao, Ze Zhang, Ze Zhang, } "Stray light analysis of large aperture optical telescope using TracePro", Proc. SPIE 9298, International Symposium on Optoelectronic Technology and Application 2014: Imaging Spectroscopy; and Telescopes and Large Optics, 92981F (18 November 2014); doi: 10.1117/12.2072244; https://doi.org/10.1117/12.2072244
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

OARDAS stray radiation analysis software
Proceedings of SPIE (September 27 1999)
Stray light analysis of the Formosat-5 telescope
Proceedings of SPIE (October 15 2012)
Front panel engineering with CAD simulation tool
Proceedings of SPIE (April 12 1999)

Back to Top