Ultralow-loss waveguide crossings for the integration of microfluidics and optical waveguide sensors

Zheng Wang; Hai Yan; Zongxing Wang; Yi Zou; Chun-Ju Yang; Swapnajit Chakravarty; Harish Subbaraman; Naimei Tang; Xiaochuan Xu; D. L. Fan; Alan X. Wang; Ray T. Chen

doi:10.1117/12.2078384

13 March 2015 Ultralow-loss waveguide crossings for the integration of microfluidics and optical waveguide sensors

Zheng Wang, Hai Yan, Zongxing Wang, Yi Zou, Chun-Ju Yang, Swapnajit Chakravarty, Harish Subbaraman, Naimei Tang, Xiaochuan Xu, D. L. Fan, Alan X. Wang, Ray T. Chen

Author Affiliations +

Proceedings Volume 9320, Microfluidics, BioMEMS, and Medical Microsystems XIII; 932012 (2015) https://doi.org/10.1117/12.2078384
Event: SPIE BiOS, 2015, San Francisco, California, United States

Abstract

Integrating photonic waveguide sensors with microfluidics is promising in achieving high-sensitivity and cost-effective biological and chemical sensing applications. One challenge in the integration is that an air gap would exist between the microfluidic channel and the photonic waveguide when the micro-channel and the waveguide intersect. The air gap creates a path for the fluid to leak out of the micro-channel. Potential solutions, such as oxide deposition followed by surface planarization, would introduce additional fabrication steps and thus are ineffective in cost. Here we propose a reliable and efficient approach for achieving closed microfluidic channels on a waveguide sensing chip. The core of the employed technique is to add waveguide crossings, i.e., perpendicularly intersecting waveguides, to block the etched trenches and prevent the fluid from leaking through the air gap. The waveguide crossings offer a smooth interface for microfluidic channel bonding while bring negligible additional propagation loss (0.024 dB/crossing based on simulation). They are also efficient in fabrication, which are patterned and fabricated in the same step with waveguides. We experimentally integrated microfluidic channels with photonic crystal (PC) microcavity sensor chips on silicon-on-insulator substrate and demonstrated leak-free sensing measurement with waveguide crossings. The microfluidic channel was made from polydimethylsiloxane (PDMS) and pressure bonded to the silicon chip. The tested flow rates can be varied from 0.2 μL/min to 200 μL/min. Strong resonances from the PC cavity were observed from the transmission spectra. The spectra also show that the waveguide crossings did not induce any significant additional loss or alter the resonances.

Citation Download Citation

Zheng Wang, Hai Yan, Zongxing Wang, Yi Zou, Chun-Ju Yang, Swapnajit Chakravarty, Harish Subbaraman, Naimei Tang, Xiaochuan Xu, D. L. Fan, Alan X. Wang, and Ray T. Chen "Ultralow-loss waveguide crossings for the integration of microfluidics and optical waveguide sensors", Proc. SPIE 9320, Microfluidics, BioMEMS, and Medical Microsystems XIII, 932012 (13 March 2015); https://doi.org/10.1117/12.2078384

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available