Process observation in selective laser melting (SLM)

U. Thombansen; P. Abels

doi:10.1117/12.2079475

9 March 2015 Process observation in selective laser melting (SLM)

U. Thombansen, P. Abels

Proceedings Volume 9356, High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications IV; 93560R (2015) https://doi.org/10.1117/12.2079475
Event: SPIE LASE, 2015, San Francisco, California, United States

Abstract

In additive manufacturing, the quality of products can be traced by observation of process variables track by track and layer by layer. The stacking of layer wise information can be used to consolidate the entire build up history of a product thus leading to a truly three dimensional quality histogram. The first step that is necessary to achieve such a quality histogram is the acquisition of process measurands that are related to product quality. Successful acquisition of measurements for thermal radiation has been reported in several publications. The authors of such papers report the detection of changes in boundary conditions of the process by observing the thermal radiation of the process. It has been reported that for example a change in laser power has an influence on the thermal emission and that different readings are received for processing a thin powder layer on a solid work piece compared to scanning pure powder in the situation of an overhang structure. A correlation to the underlying reason for the increase in thermal radiation however is mostly related to the experimental setup rather than to in process measurements. This report demonstrates an approach of acquiring and combining synchronous measurements of different physical properties of the process. The coaxial observation system used in the experiments enables the synchronous acquisition of measurements of the thermal emission and the acquisition of images that visualize the surface of the powder bed in the vicinity of the interaction zone. The images are used to monitor the motion of powder particles as they are influenced by the melting process. This amount of particle motion is then correlated to areas of different powder thicknesses. The combination of this information with excessive readings in thermal emission classifies the event to be a situation of noncritical deviation of thermal emission. In fact, this combination of extracted features establishes a first key criterion for an unequivocal event mapping.

Citation Download Citation

U. Thombansen and P. Abels "Process observation in selective laser melting (SLM)", Proc. SPIE 9356, High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications IV, 93560R (9 March 2015); https://doi.org/10.1117/12.2079475

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available