You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
8 February 2015Color dithering methods for LEGO-like 3D printing
Color dithering methods for LEGO-like 3D printing are proposed in this study. The first method is work for opaque
color brick building. It is a modification of classic error diffusion. Many color primaries can be chosen. However,
RGBYKW is recommended as its image quality is good and the number of color primary is limited. For translucent
color bricks, multi-layer color building can enhance the image quality significantly. A LUT-based method is proposed
to speed the dithering proceeding and make the color distribution even smoother. Simulation results show the proposed
multi-layer dithering method can really improve the image quality of LEGO-like 3D printing.
Pei-Li Sun andYuping Sie
"Color dithering methods for LEGO-like 3D printing", Proc. SPIE 9395, Color Imaging XX: Displaying, Processing, Hardcopy, and Applications, 93950J (8 February 2015); https://doi.org/10.1117/12.2083544
The alert did not successfully save. Please try again later.
Pei-Li Sun, Yuping Sie, "Color dithering methods for LEGO-like 3D printing," Proc. SPIE 9395, Color Imaging XX: Displaying, Processing, Hardcopy, and Applications, 93950J (8 February 2015); https://doi.org/10.1117/12.2083544