Translator Disclaimer
8 February 2015 A study of slanted-edge MTF stability and repeatability
Author Affiliations +
Proceedings Volume 9396, Image Quality and System Performance XII; 93960L (2015) https://doi.org/10.1117/12.2077755
Event: SPIE/IS&T Electronic Imaging, 2015, San Francisco, California, United States
Abstract
The slanted-edge method of measuring the spatial frequency response (SFR) as an approximation of the modulation transfer function (MTF) has become a well known and widely used image quality testing method over the last 10 years. This method has been adopted by multiple international standards including ISO and IEEE. Nearly every commercially available image quality testing software includes the slanted-edge method and there are numerous open-source algorithms available. This method is one of the most important image quality algorithms in use today. This paper explores test conditions and the impacts they have on the stability and precision of the slanted-edge method as well as details of the algorithm itself. Real world and simulated data are used to validate the characteristics of the algorithm. Details of the target such as edge angle and contrast ratio are tested to determine the impact on measurement under various conditions. The original algorithm defines a near vertical edge so that errors introduced are minor but the theory behind the algorithm requires a perfectly vertical edge. A correction factor is introduced as a way to compensate for this problem. Contrast ratio is shown to have no impact on results in an absence of noise.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jackson K. M. Roland "A study of slanted-edge MTF stability and repeatability", Proc. SPIE 9396, Image Quality and System Performance XII, 93960L (8 February 2015); https://doi.org/10.1117/12.2077755
PROCEEDINGS
9 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

An ISO standard for measuring low light performance
Proceedings of SPIE (February 27 2015)
Estimation error in image quality measurements
Proceedings of SPIE (January 24 2011)
Target edge response
Proceedings of SPIE (October 20 2004)

Back to Top