Imaging task-based optimal kV and mA selection for CT radiation dose reduction: from filtered backprojection (FBP) to statistical model based iterative reconstruction (MBIR)

Ke Li; Daniel Gomez-Cardona; Meghan G. Lubner; Perry J. Pickhardt M.D.; Guang-Hong Chen

doi:10.1117/12.2082357

18 March 2015 Imaging task-based optimal kV and mA selection for CT radiation dose reduction: from filtered backprojection (FBP) to statistical model based iterative reconstruction (MBIR)

Ke Li, Daniel Gomez-Cardona, Meghan G. Lubner, Perry J. Pickhardt M.D., Guang-Hong Chen

Author Affiliations +

Proceedings Volume 9412, Medical Imaging 2015: Physics of Medical Imaging; 94121M (2015) https://doi.org/10.1117/12.2082357
Event: SPIE Medical Imaging, 2015, Orlando, Florida, United States

Abstract

Optimal selections of tube potential (kV) and tube current (mA) are essential in maximizing the diagnostic potential of a given CT technology while minimizing radiation dose. The use of a lower tube potential may improve image contrast, but may also require a significantly higher tube current to compensate for the rapid decrease of tube output at lower tube potentials. Therefore, the selection of kV and mA should take those kinds of constraints as well as the specific diagnostic imaging task in to consideration. For conventional quasi-linear CT systems employing linear filtered back-projection (FBP) image reconstruction algorithm, the optimization of kV-mA combinations are relatively straightforward, as neither spatial resolution nor noise texture has significant dependence on kV and mA settings. In these cases, zero-frequency analysis such as contrast-to-noise ratio (CNR) or normalized CNR by dose (CNRD) can be used for optimal kV-mA selection. The recently introduced statistical model-based iterative reconstruction (MBIR) method, however, has introduced new challenges to optimal kV and mA selection, as both spatial resolution and noise texture become closely correlated with kV and mA. In this work, a task-based approach based on modern signal detection theory and the corresponding frequency-dependent analysis has been proposed to perform the kV and mA optimization for both FBP and MBIR. By performing exhaustive measurements of task-based detectability index through the technically accessible kV-mA parameter space, iso-detectability contours were generated and overlaid on top of iso-dose contours, from which the kV-mA pair that minimize dose yet still achieving the desired detectability level can be identified.

Citation Download Citation

Ke Li, Daniel Gomez-Cardona, Meghan G. Lubner, Perry J. Pickhardt M.D., and Guang-Hong Chen "Imaging task-based optimal kV and mA selection for CT radiation dose reduction: from filtered backprojection (FBP) to statistical model based iterative reconstruction (MBIR)", Proc. SPIE 9412, Medical Imaging 2015: Physics of Medical Imaging, 94121M (18 March 2015); https://doi.org/10.1117/12.2082357

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
6 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Statistical analysis

Computed tomography

Image filtering

Diagnostics

Eye models

Optical filters

Spatial resolution

Show All Keywords

Keywords/Phrases

Search In:

Publication Years