In this paper, we have studied the wafer overlay correction capability by RegC® in addition to the TWINSCANTM intrafield corrections to improve the on product overlay performance. RegC® is a reticle intra-volume laser writing technique that causes a predictable deformation element (RegC® deformation element) inside the quartz (Qz) material of a reticle. This technique enables to post-process an existing reticle to correct for instance for IPE. Alternatively, a pre-determined intra-field fingerprint can be added to the reticle such that it results in a straight field after exposure. This second application might be very powerful to correct for instance for (cold) lens fingerprints that cannot be corrected by the scanner itself. Another possible application is the intra-field processing fingerprint. One should realize that a RegC® treatment of a reticle generally results in global distortion of the reticle. This is not a problem as long as these global distortions can be corrected by the TWINSCANTM system (currently up to the third order). It is anticipated that the combination of the RegC® and the TWINSCANTM corrections act as complementary solutions. These solutions perfectly fit into the ASML Litho InSight (LIS) product in which feedforward and feedback corrections based on YieldStar overlay measurements are used to improve the on product overlay.
ACCESS THE FULL ARTICLE
Ofir Sharoni, Vladimir Dmitriev, Erez Graitzer, Yuval Perets, Kujan Gorhad, Richard van Haren, Hakki Ergun Cekli, Jan Mulkens, "Intra-field on-product overlay improvement by application of RegC and TWINSCAN corrections," Proc. SPIE 9424, Metrology, Inspection, and Process Control for Microlithography XXIX, 94241K (19 March 2015);