20 March 2015 Advanced shrink material for NTD process with lower Y/X shrinkage bias of elongated patterns
Author Affiliations +
Abstract
Negative tone shrink materials (NSM) suitable for resolution enhancement of negative tone development (NTD) 193nm immersion resists have been developed. While this technology is being expanded to integrated circuits (IC) manufacturing, there still have two major problems to apply various processes. One of them is shrink ID bias which means shrink differences between isolated (I) and dense (D) CDs, and the other one is Y/X shrinkage bias which means shrinkage differences between major axis (Y) and minor axis (X) of the elongated or oval shape pattern. While we have presented the improvement of shrink ID bias at SPIE2014 [1], the reduction of Y/X shrinkage bias was the examination theme for quite some time. In this paper, we present Y/X shrinkage bias of current NTD shrink material, new concept material for Y/X bias reduction and the result of new shrink material. Current NTD shrink model has Y/X bias of 1.6 (Y shrink=16nm) at a mixing bake (MB) of 150°C on AZ AX2110P NTD elongated pattern of X=70nm and Y=210nm ADI. This means shrinkage of Y has larger shrinkage than X and that makes difficult to apply shrink material. We expected that the characteristic shape of elongated pattern was one of the root-cause for Y/X bias, and then simulated how to achieve equivalent shrinkage at Y and X. We concluded that available resist volume per each Y and X unit was not equivalent and need new shrink concept to solve Y/X bias. Based on our new concept, we prepared new shrink material which has lower Y/X bias and larger shrink amount compared with current NTD shrink material. Finally we have achieved lower Y/X bias from 1.6 to 1.1 at MB150°C and moreover got higher shrinkage than current NTD shrink material from 10.1nm to 16.7nm.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yoshihiro Miyamoto, Yoshihiro Miyamoto, Takashi Sekito, Takashi Sekito, John Sagan, John Sagan, Yuko Horiba, Yuko Horiba, Takafumi Kinuta, Takafumi Kinuta, Tatsuro Nagahara, Tatsuro Nagahara, Shinji Tarutani, Shinji Tarutani, } "Advanced shrink material for NTD process with lower Y/X shrinkage bias of elongated patterns", Proc. SPIE 9425, Advances in Patterning Materials and Processes XXXII, 942520 (20 March 2015); doi: 10.1117/12.2085736; https://doi.org/10.1117/12.2085736
PROCEEDINGS
6 PAGES


SHARE
Back to Top