17 March 2015 Photoresist performance modification through plasma treatment
Author Affiliations +
One of most promising technique for the extension of 193nm immersion lithography must be Self-Aligned Multiple Patterning (SAMP) at the present. We have studied this SAMP in several aspects, which are scaling capability, mitigation of process complexity, pattern fidelity, affordability and so on. On the other hand, Gridded Design Rule (GDR) concept with Single directional layout (1D layout) extended the down-scaling with 193-immersion furthermore and relieve the process variation and process complexity, represented in Optical proximity effect (OPE), by simplification of layout design. In 1D layout fabrication, Key process steps might be edge placement control on grating line and controllability of hole-shrink technique for line-cutting. This paper introduces current demonstration results on pattern transfer fidelity control and hole-shrink technique as combined with unique pattern shape repair approach.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hidetami Yaegashi, Hidetami Yaegashi, Kenichi Oyama, Kenichi Oyama, Arisa Hara, Arisa Hara, Sakurako Natori, Sakurako Natori, Shohei Yamauchi, Shohei Yamauchi, Masatoshi Yamato, Masatoshi Yamato, Noriaki Okabe, Noriaki Okabe, Kyohei Koike, Kyohei Koike, "Photoresist performance modification through plasma treatment", Proc. SPIE 9428, Advanced Etch Technology for Nanopatterning IV, 94280H (17 March 2015); doi: 10.1117/12.2085093; https://doi.org/10.1117/12.2085093


A new method based on AFM for the study of...
Proceedings of SPIE (March 28 2013)
CD bias control on hole pattern
Proceedings of SPIE (March 24 2016)
Negative tone 193-nm photoresists
Proceedings of SPIE (June 11 2003)

Back to Top