29 April 2015 Variable stiffness and recruitment using nylon actuators arranged in a pennate configuration
Author Affiliations +
Abstract
In muscle variable impedance and ability to recruit fibers as needed helps enable actions such as walking and catching. A new biomimetic structure of nylon actuator is presented that imitates the human pennate muscle in structure, ability to vary stiffness and the ability to increase force by recruiting additional fibers. The actuator consists of 16 silver coated nylon coiled fibers attached to a central tendon at an angle of 20°. Each nylon coil produces 20 MPa of stress at constant length and nearly 20% strain at fixed load. Fibers are individually switched ON and OFF using transistors so that each element can be recruited, and the stiffness varied. The amount of input power is controlled with pulse width modulation (PWM) techniques. It is observed that the spring constant of the pennate structure varies from that of its passive state, 503 N/m and a resonance frequency of 1.4 Hz, to 1480 N/m with resonance frequency of 3.1 Hz in the active state where all the fibers are switched on under a 25 N load. Stiffness can be varied by a factor of 9.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Soheil Kianzad, Soheil Kianzad, Milind Pandit, Milind Pandit, Johnathan D. Lewis, Johnathan D. Lewis, Alexander R. Berlingeri, Alexander R. Berlingeri, Karl J. Haebler, Karl J. Haebler, John D. W. Madden, John D. W. Madden, } "Variable stiffness and recruitment using nylon actuators arranged in a pennate configuration", Proc. SPIE 9430, Electroactive Polymer Actuators and Devices (EAPAD) 2015, 94301Z (29 April 2015); doi: 10.1117/12.2086799; https://doi.org/10.1117/12.2086799
PROCEEDINGS
5 PAGES


SHARE
Back to Top