1 April 2015 Bio-inspired artificial muscle structure for integrated sensing and actuation
Author Affiliations +
Abstract
In this paper, a novel artificial muscle/tendon structure is developed for achieving bio-inspired actuation and self-sensing. The hybrid structure consists of a dielectric elastomer (DE) material connected with carbon fibers, which incorporates the built-in sensing and actuation capability of DE and mechanical, electrical interfacing capability of carbon fibers. DEs are light weight artificial muscles that can generate compliant actuation with low power consumption. Carbon fibers act as artificial tendon due to their high electro-conductivity and mechanical strength. PDMS material is used to electrically and mechanically connect the carbon fibers with the DE material. A strip actuator was fabricated to verify the structure design and characterize its actuation and sensing capabilities. A 3M VHB 4905 tape was used as the DE material. To make compliant electrodes on the VHB tape, carbon black was sprayed on the surface of VHB tape. To join the carbon fibers to the VHB tape, PDMS was used as bonding material. Experiments have been conducted to characterize the actuation and sensing capabilities. The actuation tests have shown that the energy efficiency of artificial muscle can reach up to 0.7% and the strain can reach up to 1%. The sensing tests have verified that the structure is capable of self-sensing through the electrical impedance measurement.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhihang Ye, Md. Shahnewaz Sabit Faisal, Ramazan Asmatulu, Zheng Chen, "Bio-inspired artificial muscle structure for integrated sensing and actuation", Proc. SPIE 9430, Electroactive Polymer Actuators and Devices (EAPAD) 2015, 943024 (1 April 2015); doi: 10.1117/12.2085882; https://doi.org/10.1117/12.2085882
PROCEEDINGS
10 PAGES


SHARE
Back to Top