24 April 2015 Spiral passive electromagnetic sensor (SPES) for smart sensing and de-icing
Author Affiliations +
Abstract
The objective of this work was to develop a wireless Spiral Passive Electromagnetic Sensor (SPES) to monitor the complex permittivity of a surrounding medium. The sensor is a self-resonating planar pattern of electrically conductive material. Investigation were conducted to demonstrate the capability of the SPES to monitor humidity and temperature gradients, and acting as an ice protection tool. An oscillating signal is used to interrogate remotely the sensor with a single loop antenna or wiring it directly to a spectrum analyser and monitoring the backscattering signal. The excited sensor responds with its own resonant frequency, amplitude and bandwidth that can be correlated to physical quantities to be monitored. Our studies showed the capability of the sensor to monitor temperature and humidity changes in composite materials and uniformly produce induction heating when the conductive path is activated by an external electric power supply that can be used for deicing of aircraft structures.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Onorio Iervolino, Onorio Iervolino, Michele Meo, Michele Meo, } "Spiral passive electromagnetic sensor (SPES) for smart sensing and de-icing", Proc. SPIE 9435, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2015, 943528 (24 April 2015); doi: 10.1117/12.2086107; https://doi.org/10.1117/12.2086107
PROCEEDINGS
14 PAGES


SHARE
RELATED CONTENT

Patch antenna based temperature sensor
Proceedings of SPIE (April 10 2014)
Mechanically-tunable composite filter at low frequencies
Proceedings of SPIE (March 30 2010)
Pressure and shear sensing based on microstrip antennas
Proceedings of SPIE (April 03 2012)
Thick film wireless and powerless strain sensor
Proceedings of SPIE (April 11 2006)

Back to Top