27 March 2015 Fault detection in small diameter pipes using ultrasonic guided wave technology
Author Affiliations +
Abstract
Ultrasonic guided wave technology is one of the more recent developments in the field of non-destructive evaluation. In contrast to conventional ultrasonic, this technology requires exposing only the areas where the transducers will be placed, hence requiring minimal insulation removal and excavation for buried pipes. This paper discusses how this technology can be used to detect defects in pipes under different conditions. Here the experiments were performed on small diameter pipes (<5 cm diameter); which were bare pipe, buried pipe and bitumen coated pipe. The results were gathered to see the effectiveness of this technology in detecting defects. Experiments were conducted using two dry coupled piezoelectric transducers, where one of them transmitted guided waves along the pipe and the other received them. The transducers produced tangential displacement, thereby generating the fundamental torsional mode T(0,1). In order to assess whether having multiple transducers has any effect on the resultant waveform, the receiving transducer was rotated around the circumference of the pipe.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rahul M. Sabhnani, Rahul M. Sabhnani, Victor Humphrey, Victor Humphrey, Bahareh Zaghari, Bahareh Zaghari, Mohammed Moshrefi-Torbati, Mohammed Moshrefi-Torbati, } "Fault detection in small diameter pipes using ultrasonic guided wave technology", Proc. SPIE 9435, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2015, 94353F (27 March 2015); doi: 10.1117/12.2085494; https://doi.org/10.1117/12.2085494
PROCEEDINGS
13 PAGES


SHARE
Back to Top