27 March 2015 Comparative discussion between first and second modes of Terfenol-D transducer
Author Affiliations +
Abstract
Terfenol-D resonance transducer has high energy-density and high vibration amplitude. These features make them good selection for using in different applications such as liquid atomizers and sonar transducers. Operating mode of the Terfenol- D transducer plays an important role in efficiency of it. It can also change some parameters of the transducer such as quality factor. In this paper, experimental comparative study between first and second longitudinal modes of vibration in the Terfenol-D transducer is presented. It contains the mechanical quality factor, band with frequency and also effect of changing Young modulus in resonance frequency and mode shape. For this purpose, a resonance transducer for working in 3 kHz in first mode and 8.25 kHz in second mode has been designed and fabricated. In design procedure, preload mechanism location is considered as nodes. Quality factor and bandwidth is calculated experimentally and resonance frequency and mode shape has been calculated both with analytical method and ANSYS12 FEM commercial software. Results show that higher quality factor in the second mode shape and this mode shows lower sensitivity with Young modulus .
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mohammad Reza Sheykholeslami, Yousef Hojjat, Mojtaba Ghodsi, Simone Cinquemani, "Comparative discussion between first and second modes of Terfenol-D transducer", Proc. SPIE 9435, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2015, 94353H (27 March 2015); doi: 10.1117/12.2085544; https://doi.org/10.1117/12.2085544
PROCEEDINGS
10 PAGES


SHARE
Back to Top