18 December 2014 New generation photoelectric converter structure optimization using nano-structured materials
Author Affiliations +
Proceedings Volume 9440, International Conference on Micro- and Nano-Electronics 2014; 94400H (2014) https://doi.org/10.1117/12.2180871
Event: The International Conference on Micro- and Nano-Electronics 2014, 2014, Zvenigorod, Russian Federation
Abstract
In present work the influence of anodizing process parameters on PAOT geometric parameters for optimizing and increasing ETA-cell efficiency was studied. During the calculations optimal geometrical parameters were obtained. Parameters such as anodizing current density, electrolyte composition and temperature, as well as the anodic oxidation process time were selected for this investigation. Using the optimized TiO2 photoelectrode layer with 3,6 μm porous layer thickness and pore diameter more than 80 nm the ETA-cell efficiency has been increased by 3 times comparing to not nanostructured TiO2 photoelectrode.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Dronov, A. Dronov, I. Gavrilin, I. Gavrilin, A. Zheleznyakova, A. Zheleznyakova, } "New generation photoelectric converter structure optimization using nano-structured materials", Proc. SPIE 9440, International Conference on Micro- and Nano-Electronics 2014, 94400H (18 December 2014); doi: 10.1117/12.2180871; https://doi.org/10.1117/12.2180871
PROCEEDINGS
10 PAGES


SHARE
RELATED CONTENT


Back to Top