7 January 2015 Design and realization of an aspherical doublet
Author Affiliations +
Proceedings Volume 9442, Optics and Measurement Conference 2014; 94420U (2015) https://doi.org/10.1117/12.2175915
Event: Optics and Measurement Conference 2014, 2014, Liberec, Czech Republic
We have realized an optical design of air space doublet of 100 mm clear aperture and 520 mm focal length that is optimized with respect to a quality of wavefront error better than 0.07 λ RMS for on-axis imaging at wavelengths of 633 nm and 450 nm. To minimize optical aberrations we have designed one of the four surfaces to be an aspherical. Based on a tolerance analyses those take into account planned spherical and aspherical technologies for surfaces realization and measurement equipment we have realized the doublet. In the paper there is described a technique of the optical design, tolerance analysis, technique of objective realization and results of the optical elements realization.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Radek Melich, Radek Melich, Milan Matela, Milan Matela, Frantisek Prochaska, Frantisek Prochaska, Pavel Psota, Pavel Psota, Ondrej Matousek, Ondrej Matousek, David Tomka, David Tomka, } "Design and realization of an aspherical doublet", Proc. SPIE 9442, Optics and Measurement Conference 2014, 94420U (7 January 2015); doi: 10.1117/12.2175915; https://doi.org/10.1117/12.2175915


Ready to use a multi focal system based on Alvarez...
Proceedings of SPIE (June 04 2018)
Tolerancing aspheres based on manufacturing statistics
Proceedings of SPIE (November 26 2017)
Aspheric design for manufacturability
Proceedings of SPIE (May 13 2007)
The cost of tolerancing
Proceedings of SPIE (August 28 2009)

Back to Top