14 February 2015 Noncontact surface roughness measurement using a vision system
Author Affiliations +
Proceedings Volume 9445, Seventh International Conference on Machine Vision (ICMV 2014); 944525 (2015) https://doi.org/10.1117/12.2180683
Event: Seventh International Conference on Machine Vision (ICMV 2014), 2014, Milan, Italy
Abstract
Surface roughness measurement is one of the basic measurement that determines the quality and performance of the final product. After machined operations, tracer end tools are commonly used in industry in order to measure the surface roughness that occurred on the surface. This measurement technique has disadvantages such as user errors because it requires calibration of the device occurring during measurement. In this study, measuring and evaluation techniques were conducted by using display devices over surface image which occurred on the processed surfaces. Surface measurement which performed by getting image makes easier measurement process because it is non-contact, and does not cause any damage. Measurement of surface roughness, and analysis was conducted more precise and accurate. Experimentally obtained results of the measurements on the parts in contact with the device is improved compared with the results of the non-contact image processing software, and satisfactory results were obtained.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Erdinç Koçer, Erdinç Koçer, Erhan Horozoğlu, Erhan Horozoğlu, Ilhan Asiltürk, Ilhan Asiltürk, } "Noncontact surface roughness measurement using a vision system", Proc. SPIE 9445, Seventh International Conference on Machine Vision (ICMV 2014), 944525 (14 February 2015); doi: 10.1117/12.2180683; https://doi.org/10.1117/12.2180683
PROCEEDINGS
5 PAGES


SHARE
Back to Top