You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
6 January 2015On the development of a low-cost rigid borescopic fringe projection system
Examining the geometry of complex industrial free form objects, like a blade integrated disk (blisk) of a jet engine compressor, is currently subject to research. High measurement precision and speed are required and the complex geometry poses a challenge for state of the art measurement systems. In order to fulfill typical inspection requirements, the fringe projection methodology was adapted in this work to accomplish the task of fast and precise geometry examination. A low cost borescopic fringe projection system for 3D shape measurement based on consumer electronics combined with state of the art optics was developed. Nevertheless, it is able to provide measurement uncertainties comparable to professional systems. We are using a portable consumer LED-beamer, which we have modified to fit the optics of the borescope and a Raspberry Pi single-board computer with a 5 megapixel camera to capture the fringe patterns. With this setup and fringe projection algorithms, which have been developed by this institute over the last years, we were able to perform high quality measurements while still being suitable for a compact inspection system. Measurements with high point densities are possible even in narrow areas of parts with complex geometries like blisks. The measuring system and first measurement results will be presented at the conference.
The alert did not successfully save. Please try again later.
Jochen Schlobohm, Andreas Pösch, Markus Kästner, Eduard Reithmeier, "On the development of a low-cost rigid borescopic fringe projection system," Proc. SPIE 9450, Photonics, Devices, and Systems VI, 945009 (6 January 2015); https://doi.org/10.1117/12.2067310