22 May 2015 Freeform optical manufacturing and testing processes for IR conformal window and domes
Author Affiliations +
Abstract
Freeform optical shapes or optical surfaces that are designed with non-symmetric features are gaining popularity with lens designers and optical system integrators. This enabling technology allows for conformal sensor windows and domes that provide enhanced aerodynamic properties as well as environmental and ballistic protection. In order to provide ballistic and environmental protection, these conformal windows and domes are typically fabricated from hard ceramic materials which challenge the optical fabricator. The material hardness, polycrystalline nature and non-traditional shape demand creative optical fabrication techniques to produce these types of optics cost-effectively. This paper will overview a complete freeform optical fabrication process that includes ultrasonic generation of hard ceramic surfaces, high speed VIBE polishing, sub-aperture figure correction of polycrystalline materials, finishing and final testing of freeform surfaces. This paper will highlight the progress made to each of the processes as well as the challenges associated with each of them specifically focusing on the use of fiducials in the manufacturing and measurement process and the adaptation of stitching interferometry to the measurement of a freeform conformal window.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kate Medicus, Kate Medicus, Jessica DeGroote Nelson, Jessica DeGroote Nelson, Timothy Lynch, Timothy Lynch, Matt Brunelle, Matt Brunelle, Matthew Brophy, Matthew Brophy, } "Freeform optical manufacturing and testing processes for IR conformal window and domes", Proc. SPIE 9453, Window and Dome Technologies and Materials XIV, 94530E (22 May 2015); doi: 10.1117/12.2177279; https://doi.org/10.1117/12.2177279
PROCEEDINGS
10 PAGES


SHARE
RELATED CONTENT

The need for fiducials on freeform optical surfaces
Proceedings of SPIE (September 03 2015)
It's the subtleties that make the difference
Proceedings of SPIE (February 26 2004)
Manufacturing and testing an 8.3-m astronomical mirror
Proceedings of SPIE (November 11 1999)
Manufacturing of high-precision aspheres
Proceedings of SPIE (June 09 2006)

Back to Top