Translator Disclaimer
15 November 1976 A Multigas Analyzer For Automobile Exhausts
Author Affiliations +
The multigas analyzer simultaneously measures the concentrations of CO, CH4 and CO2 in flowing samples of automobile exhaust. Three channels share a single rotating gas correlation cell and measure the individual concentrations of CO and CH4. Two CO channels with different sample cell lengths extend the useful range. A rotating dual-filter system measures the CO2 concentrations. As many as three separate CO2 channels can share a rotating filter assembly. A system employing two fixed filters and two detectors measures the concentration of H2O and automatically accounts for a slight interference by this gas in the CH4 channel. Discrimination against other typical exhaust gases is excellent. An automatic gain control minimizes calibration drift. The ranges of measurable concentrations are 0.3 ppm (parts-per-million) to 3000 ppm of CH4; 0.7 ppm to 10% of CO; and 60 ppm to 30% of CO2, where the minimum concentrations correspond to the peak-to-peak noise levels with one-second time constants. The theory of operation, the measurement capabilities, and the physical characteristics are described.
© (1976) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John D. Pembrook and Darrell E. Burch "A Multigas Analyzer For Automobile Exhausts", Proc. SPIE 0095, Modern Utilization of Infrared Technology II, (15 November 1976);


Study of vehicle exhaust detection based on TDLAS
Proceedings of SPIE (November 18 2019)
The next generation of TDLAS analyzers
Proceedings of SPIE (October 02 2007)
Progress in fiber-remote gas correlation spectrometry
Proceedings of SPIE (September 01 1991)

Back to Top