5 May 2015 FBG-based novel sensor for high-temperature measurement and its low-cost interrogation
Author Affiliations +
Abstract
A novel sensor for high-temperature measurement using Fiber Bragg grating (FBG) along with its low-cost interrogation system has been designed and tested. The sensor works based on measurement of the shift in Bragg wavelength that corresponds to the temperature induced strain by making use of a mechanical transducer. The transducing element provides temperature dependent strain on FBG by means of differential linear thermal expansion of two different materials, stainless steel and mild steel. The shift in Bragg wavelength of FBG due to this temperature induced strain is measured by using optical spectrum analyser (OSA). Further the bulk and expensive OSA is replaced by a low cost interrogation system that employed an LPG, a photodiode, a transimpedance amplifier, and a digital multimeter. The LPG converts wavelength information of FBG into its equivalent intensity modulated signal which is captured by a simple photodiode and then converted into voltage signal using the transimpedance amplifier. The designed sensor measures the temperature from 20°C to 1000°C with a resolution of 2°C.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Venkata Reddy M., Venkata Reddy M., Srimannarayana K., Srimannarayana K., R. L. N. Sai Prasad, R. L. N. Sai Prasad, T. V. Apparao, T. V. Apparao, Vengal Rao P., Vengal Rao P., } "FBG-based novel sensor for high-temperature measurement and its low-cost interrogation", Proc. SPIE 9506, Optical Sensors 2015, 95060C (5 May 2015); doi: 10.1117/12.2181966; https://doi.org/10.1117/12.2181966
PROCEEDINGS
6 PAGES


SHARE
Back to Top