13 April 2015 Modeling and characteristic of the SMT Board Plug connector in high speed optical communication system
Author Affiliations +
Proceedings Volume 9522, Selected Papers from Conferences of the Photoelectronic Technology Committee of the Chinese Society of Astronautics 2014, Part II; 952211 (2015) https://doi.org/10.1117/12.2179587
Event: Selected Proceedings of the Photoelectronic Technology Committee Conferences held August-October 2014, 2014, China, China
Abstract
Modeling and characteristic of the SMT Board Plug connector, which is used to connect micro optical transceiver to the main board, are proposed and analyzed in this paper. When the high speed signal transfers from the PCB of transceiver to main board through SMT Board Plug connector, the structure and material discontinuity of the connector causes insertion losses and impedance mismatches. This makes the performance of high speed digital system exacerbated. So it is essential to analyze the signal transfer characteristics of the connector and find out what factors affected the signal quality at the design stage of the digital system. To solve this problem, Ansoft's High Frequency Structure Simulator (HFSS), based on the finite element method, was employed to build accurate 3D models, analyze the effects of various structure parameters, and obtain the full-wave characteristics of the SMT Board Plug connectors in this paper. Then an equivalent circuit model was developed. The circuit parameters were extracted precisely in the frequency range of interests by using the curve fitting method in ADS software, and the result was in good agreement with HFSS simulations up to 8GHz with different structure parameters. At last, the measurement results of S-parameter and eye diagram were given and the S-parameters showed good coincidence between the measurement and HFSS simulation up to 4GHz.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Haoran Wu, Haoran Wu, Zhenzhen Dong, Zhenzhen Dong, Tanglin Wang, Tanglin Wang, Heng Zhao, Heng Zhao, Junbo Feng, Junbo Feng, Naidi Cui, Naidi Cui, Jie Teng, Jie Teng, Jin Guo, Jin Guo, } "Modeling and characteristic of the SMT Board Plug connector in high speed optical communication system", Proc. SPIE 9522, Selected Papers from Conferences of the Photoelectronic Technology Committee of the Chinese Society of Astronautics 2014, Part II, 952211 (13 April 2015); doi: 10.1117/12.2179587; https://doi.org/10.1117/12.2179587
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

Analysis of routing strategy on ASON blocking probability
Proceedings of SPIE (September 28 2006)
Light Focussing Glass Fiber And Rod
Proceedings of SPIE (June 01 1970)
Fiber Optic Entrance Links For Electric Utilities
Proceedings of SPIE (September 19 1980)

Back to Top