17 July 2015 A novel absolute measurement for the low-frequency figure correction of aspheric surfaces
Author Affiliations +
Proceedings Volume 9524, International Conference on Optical and Photonic Engineering (icOPEN 2015); 952417 (2015) https://doi.org/10.1117/12.2189408
Event: International Conference on Optical and Photonic Engineering (icOPEN2015), 2015, Singapore, Singapore
Abstract
This study proposes an absolute measurement method with a computer-generated hologram (CGHs) to assist the identification of manufacturing form error, and gravity and mounting resulted distortions for a 300 mm aspherical mirror. This method adopts the frequency of peaks and valleys of each Zernike coefficient grabbed by the measurement with various orientations of the mirror in horizontal optical-axis configuration. In addition, the rotational-symmetric aberration (spherical aberration) is calibrated with random ball test method. According to the measured absolute surface figure, a high accuracy aspherical surface with peak to valley (P-V) value of 1/8 wave @ 632.8 nm was fabricated after surface figure correction with the reconstructed error map.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wei-Cheng Lin, Wei-Cheng Lin, Shenq-Tsong Chang, Shenq-Tsong Chang, Cheng-Fang Ho, Cheng-Fang Ho, Ching-Hsiang Kuo, Ching-Hsiang Kuo, Chien-Kai Chung, Chien-Kai Chung, Wei-Yao Hsu, Wei-Yao Hsu, Shih-Feng Tseng, Shih-Feng Tseng, Cheng-Kuo Sung, Cheng-Kuo Sung, } "A novel absolute measurement for the low-frequency figure correction of aspheric surfaces", Proc. SPIE 9524, International Conference on Optical and Photonic Engineering (icOPEN 2015), 952417 (17 July 2015); doi: 10.1117/12.2189408; https://doi.org/10.1117/12.2189408
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

Machining of paraboloidal mirrors
Proceedings of SPIE (May 13 2007)
Progress in the stressed lap polishing of a 1.8 m...
Proceedings of SPIE (June 30 1990)
Primary mirror segment fabrication for CELT
Proceedings of SPIE (July 19 2000)

Back to Top