Multi-scale roughness measurement of cementitious materials using different optical profilers and window resizing analysis

Paul C. Montgomery; Fabien Salzenstein; Gianto Gianto; Komla L. Apedo; Nicolas Serres; Christophe Fond; Françoise Feugeas

doi:10.1117/12.2184711

22 June 2015 Multi-scale roughness measurement of cementitious materials using different optical profilers and window resizing analysis

Paul C. Montgomery, Fabien Salzenstein, Gianto Gianto, Komla L. Apedo, Nicolas Serres, Christophe Fond, Françoise Feugeas

Author Affiliations +

Proceedings Volume 9525, Optical Measurement Systems for Industrial Inspection IX; 95250Z (2015) https://doi.org/10.1117/12.2184711
Event: SPIE Optical Metrology, 2015, Munich, Germany

Abstract

In the development of new eco-cements for ecologically friendly construction, the porosity, surface structure and chemical nature of the material can influence the bioreceptivity of the surface and the aptitude or not of environmental micro-organisms to form biofilms. Such films are the source of biocontamination that can lead to a degradation in the structural properties over time. Accurate measurement of surface roughness and topography are important to help in the understanding of this interaction. Optical profilers are well adapted to the quantifying of large surface roughness typical of cementitious materials, being more rapid and better able to cope with high roughness compared with stylus and near field probe techniques. But any given surface profiler typically has specific range limits in terms of axial and lateral resolution and field of view, resulting in different roughness values according to the type of optical profiler used. In the present work, unpolished and polished cement paste samples have been measured with two different systems, one using interference microscopy and the other, chromatic confocal sensing. Comparison of the results from both techniques using the method of window re-sizing, more commonly used in tribology, has been used for calculating the average roughness parameters at different scales. The initial results obtained show a successful overlap of the results for the unpolished samples and a slight separation for the polished samples. The validation of the measurements is demonstrated together with a revealing of differences in the measurements on different types of surfaces due to variations in instrument performance.

Citation Download Citation

Paul C. Montgomery, Fabien Salzenstein, Gianto Gianto, Komla L. Apedo, Nicolas Serres, Christophe Fond, and Françoise Feugeas "Multi-scale roughness measurement of cementitious materials using different optical profilers and window resizing analysis", Proc. SPIE 9525, Optical Measurement Systems for Industrial Inspection IX, 95250Z (22 June 2015); https://doi.org/10.1117/12.2184711

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available