Paper
14 July 2015 Research and validation of key measurement technologies of large aperture optical elements
Renhui Guo, Lei Chen, Chao Jiang, Hui Cao, Huiqin Zhang, Binbin Zhou, Le Song
Author Affiliations +
Abstract
A lot of optical components with large aperture are employed in high-power solid-state laser driver. These optical components are with high requirement on the surface shape, optical homogeneity and stress distribution. In order to test these parameters, different types of interferometers, surface profilers and stress meters from different manufacturers are needed. But the problem is the products from different manufacturers may provide different test results. To solve the problem, the research and verification of the key measurement technologies of large aperture optical components are carried out in this paper. The absolute flatness and optical homogeneity measurement methods are analyzed. And the test results of different interferometric software are compared. The test results from different surface profilers and stress meters are also compared. The consistency and reliability of different test software are obtained with the comparing results, which will guide users to select a suitable product.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Renhui Guo, Lei Chen, Chao Jiang, Hui Cao, Huiqin Zhang, Binbin Zhou, and Le Song "Research and validation of key measurement technologies of large aperture optical elements", Proc. SPIE 9532, Pacific Rim Laser Damage 2015: Optical Materials for High-Power Lasers, 95322A (14 July 2015); https://doi.org/10.1117/12.2186267
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical components

Wavefronts

Interferometers

Optical testing

Analytical research

Birefringence

Reliability

Back to Top