Characterisation of a PVCP-based tissue-mimicking phantom for quantitative photoacoustic imaging

Martina Fonseca; Bajram Zeqiri; Paul Beard; Ben Cox

doi:10.1117/12.2183684

16 July 2015 Characterisation of a PVCP-based tissue-mimicking phantom for quantitative photoacoustic imaging

Martina Fonseca, Bajram Zeqiri, Paul Beard, Ben Cox

Proceedings Volume 9539, Opto-Acoustic Methods and Applications in Biophotonics II; 953911 (2015) https://doi.org/10.1117/12.2183684
Event: European Conferences on Biomedical Optics, 2015, Munich, Germany

Abstract

Photoacoustic imaging can provide high resolution images of tissue structure, pathology and function. As these images can be obtained at multiple wavelengths, quantitatively accurate, spatially resolved, estimates for chromophore concentration, for example, may be obtainable. Such a capability would find a wide range of clinical and pre-clinical applications. However, despite a growing body of theoretical papers on how this might be achieved, there is a noticeable lack of studies providing validated evidence that it can be achieved experimentally, either in vitro or in vivo. Well-defined, versatile and stable phantom materials are essential to assess the accuracy, robustness and applicability of multispectral Quantitative Photoacoustic Imaging (qPAI) algorithms in experimental scenarios. This study assesses the potential of polyvinyl chloride plastisol (PVCP) as a phantom material for qPAI, building on previous work that focused on using PVCP for quality control. Parameters that might be controlled or tuned to assess the performance of qPAI algorithms were studied: broadband acoustic properties, multiwavelength optical properties with added absorbers and scatterers, and photoacoustic efficiency.

The optical and acoustic properties of PVCP can be tuned to be broadly representative of soft tissue. The Grüneisen parameter is larger than expected in tissue, which is an advantage as it increases the signal-to-noise ratio of the photoacoustic measurements. Interestingly, when the absorption was altered by adding absorbers, the absorption spectra measured using high peak power nanosecond-pulsed sources (typical in photoacoustics) were repeatably different from the ones measured using the low power source in the spectrophotometer, indicative of photochemical reactions taking place.

Citation Download Citation

Martina Fonseca, Bajram Zeqiri, Paul Beard, and Ben Cox "Characterisation of a PVCP-based tissue-mimicking phantom for quantitative photoacoustic imaging", Proc. SPIE 9539, Opto-Acoustic Methods and Applications in Biophotonics II, 953911 (16 July 2015); https://doi.org/10.1117/12.2183684

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available