4 May 2015 Thermoinduced laser-assisted deposition of molybdenum from aqueous solutions
Author Affiliations +
Proceedings Volume 9543, Third International Symposium on Laser Interaction with Matter; 954326 (2015) https://doi.org/10.1117/12.2182069
Event: Third International Symposium on Laser Interaction with Matter, 2014, Jiangsu, China
Abstract
Local molybdenum deposit obtainment is promising for micro thermocouples creation on dielectric surfaces. This paper is dedicated to development of method of laser-induced molybdenum deposition from water-based solution of inorganic salt on Sitall st-50 and glass dielectric substrates, as well as research of solution composition, pH and substrate optical properties influence on result of laser-induced molybdenum deposition from solution. It was shown that depending on dielectric substrate type, as a result of laser-induced deposition metallic molybdenum or molybdenum dioxide deposit forms: molybdenum dioxide deposits in case of optically clear substrate and metallic molybdenum deposits in case of opaque glass-ceramics. While modelling interim case via using clouded glass, mixture of molybdenum and its oxide was successfully obtained.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vladimir V. Kochemirovsky, Vladimir V. Kochemirovsky, Lev S. Logunov, Lev S. Logunov, Elvira S. Zhigley, Elvira S. Zhigley, Valeriia Baranauskaite, Valeriia Baranauskaite, } "Thermoinduced laser-assisted deposition of molybdenum from aqueous solutions", Proc. SPIE 9543, Third International Symposium on Laser Interaction with Matter, 954326 (4 May 2015); doi: 10.1117/12.2182069; https://doi.org/10.1117/12.2182069
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

Application of APCVD TEOS ozone thin films in < 0.5...
Proceedings of SPIE (September 14 1993)
Laser initiation of explosives
Proceedings of SPIE (September 12 2002)
Thin Film Deposition Using SOL-GEL Technology
Proceedings of SPIE (November 27 1983)

Back to Top