26 August 2015 Post-shaping optical fiber taper filters
Author Affiliations +
Abstract
Geometrical shaping of non-adiabatic single tapers is used to modify the filtering characteristics. The fiber tapers are shaped by successive tapering. The taper shaping produces deeper rejection bands. As an application of the shaped tapers, fluidic temperature sensing cells were fabricated. In a first case, the wavelength shift of a single rejection band was monitored, showing a nonlinear response and low sensitivity to temperature changes. In a second case, a shaped taper fluidic cell containing two rejection bands was used, and the wavelength shift of the half intensity points of the transmission band (between the rejection bands) was taken as a measure of the temperature change. In this case, the fluidic cell showed a linear sensitivity of 481.9 pm/°C in a temperature range of 25°C-60°C.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Martínez-Rios, A. Martínez-Rios, G. Salceda-Delgado, G. Salceda-Delgado, R. Selvas-Aguilar, R. Selvas-Aguilar, G. Anzueto-Sanchez, G. Anzueto-Sanchez, V. M. Duran-Ramirez, V. M. Duran-Ramirez, D. Toral-Acosta, D. Toral-Acosta, } "Post-shaping optical fiber taper filters", Proc. SPIE 9586, Photonic Fiber and Crystal Devices: Advances in Materials and Innovations in Device Applications IX, 95860Z (26 August 2015); doi: 10.1117/12.2184487; https://doi.org/10.1117/12.2184487
PROCEEDINGS
6 PAGES


SHARE
Back to Top