Translator Disclaimer
4 September 2015 Addressing the problem of glass thickness variation in the indirect slumping technology
Author Affiliations +
The indirect hot slumping technology is being developed at Max-Planck-Institute for extraterrestrial Physics (MPE) for the manufacturing of lightweight astronomical X-ray telescopes. It consists of a thermal shaping process to replicate the figure of a suitable mould into segments of X-ray mirror shells made by glass. Several segments are aligned and mounted into elemental modules, a number of which is then assembled together to form the telescope. To obtain mirror segments of high optical quality, the realization of the slumping thermal cycle itself is of fundamental importance, but also the starting materials, primarily the mould and the glass foils, play a major role. This paper will review the MPE approach in the slumping technology development and will then concentrate on the glass, with particular regards to the problem of thickness variation.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Laura Proserpio, Christoph Wellnhofer, Elias Breunig, Peter Friedrich, and Anita Winter "Addressing the problem of glass thickness variation in the indirect slumping technology", Proc. SPIE 9603, Optics for EUV, X-Ray, and Gamma-Ray Astronomy VII, 96030T (4 September 2015);


Two dimensional sub 5 nm hard x ray focusing with...
Proceedings of SPIE (September 27 2013)
A design study of mirror modules and an assembly based...
Proceedings of SPIE (September 04 2015)
Low Noise Microchannel Plate Detectors For X-Ray Astronomy
Proceedings of SPIE (November 27 1989)
Cost effective design and simulations for a prototypal x ray...
Proceedings of SPIE (September 23 2011)
Practical implementation of lobster-eye optics
Proceedings of SPIE (November 19 1998)
Method of investigating polycapillary performance
Proceedings of SPIE (July 07 1997)

Back to Top