16 September 2015 Zernike wavefront sensor modeling development for LOWFS on WFIRST-AFTA
Author Affiliations +
Abstract
WFIRST-AFTA design makes use of an existing 2.4m telescope for direct imaging of exoplanets. To maintain the high contrast needed for the coronagraph, wavefront error (WFE) of the optical system needs to be continuously sensed and controlled. Low Order Wavefront Sensing (LOWFS) uses the rejected starlight from an immediate focal plane to sense wavefront changes (mostly thermally induced low order WFE) by combining the LOWFS mask (a phase plate located at the small center region with reflective layer) with the starlight rejection masks, i.e. Hybrid Lyot Coronagraph (HLC)’s occulter or Shaped Pupil Coronagraph (SPC)’s field stop. Zernike wavefront sensor (ZWFS) measures phase via the phase-contrast method and is known to be photon noise optimal for measuring low order aberrations. Recently, ZWFS was selected as the baseline LOWFS technology on WFIST/AFTA for its good sensitivity, accuracy, and its easy integration with the starlight rejection mask. In this paper, we review the theory of ZWFS operation, describe the ZWFS algorithm development, and summarize various numerical sensitivity studies on the sensor performance. In the end, the predicted sensor performance on SPC and HLC configurations are presented.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xu Wang, Xu Wang, J. Kent Wallace, J. Kent Wallace, Fang Shi, Fang Shi, "Zernike wavefront sensor modeling development for LOWFS on WFIRST-AFTA ", Proc. SPIE 9605, Techniques and Instrumentation for Detection of Exoplanets VII, 960528 (16 September 2015); doi: 10.1117/12.2186191; https://doi.org/10.1117/12.2186191
PROCEEDINGS
14 PAGES


SHARE
RELATED CONTENT


Back to Top