Performance characterization of a pressure-tuned wide-angle Michelson interferometric spectral filter for high spectral resolution lidar

Shane T. Seaman; Anthony L. Cook; Salvatore J. Scola; Chris A. Hostetler; Ian Miller; Wayne Welch

doi:10.1117/12.2189114

1 September 2015 Performance characterization of a pressure-tuned wide-angle Michelson interferometric spectral filter for high spectral resolution lidar

Shane T. Seaman, Anthony L. Cook, Salvatore J. Scola, Chris A. Hostetler, Ian Miller, Wayne Welch

Author Affiliations +

Proceedings Volume 9612, Lidar Remote Sensing for Environmental Monitoring XV; 96120H (2015) https://doi.org/10.1117/12.2189114
Event: SPIE Optical Engineering + Applications, 2015, San Diego, California, United States

Abstract

High Spectral Resolution Lidar (HSRL) is typically realized using an absorption filter to separate molecular returns from particulate returns. NASA Langley Research Center (LaRC) has designed and built a Pressure-Tuned Wide-Angle Michelson Interferometer (PTWAMI) as an alternate means to separate the two types of atmospheric returns. While absorption filters only work at certain wavelengths and suffer from low photon efficiency due to light absorption, an interferometric spectral filter can be designed for any wavelength and transmits nearly all incident photons. The interferometers developed at LaRC employ an air spacer in one arm, and a solid glass spacer in the other. Field widening is achieved by specific design and selection of the lengths and refractive indices of these two arms. The principal challenge in using such an interferometer as a spectral filter for HSRL aboard aircraft is that variations in glass temperature and air pressure cause changes in the interferometer’s optical path difference. Therefore, a tuning mechanism is needed to actively accommodate for these changes. The pressure-tuning mechanism employed here relies on changing the pressure in an enclosed, air-filled arm of the interferometer to change the arm’s optical path length. However, tuning using pressure will not adjust for tilt, mirror warpage, or thermally induced wavefront error, so the structural, thermal, and optical behavior of the device must be well understood and optimized in the design and manufacturing process. The PTWAMI has been characterized for particulate transmission ratio, wavefront error, and tilt, and shows acceptable performance for use in an HSRL instrument.

Citation Download Citation

Shane T. Seaman, Anthony L. Cook, Salvatore J. Scola, Chris A. Hostetler, Ian Miller, and Wayne Welch "Performance characterization of a pressure-tuned wide-angle Michelson interferometric spectral filter for high spectral resolution lidar", Proc. SPIE 9612, Lidar Remote Sensing for Environmental Monitoring XV, 96120H (1 September 2015); https://doi.org/10.1117/12.2189114

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available