Paper
4 September 2015 Analogue holographic wavefront sensor: a performance analysis
Author Affiliations +
Abstract
The efficiency of laser communications systems is significantly limited by atmospheric effects. Notably challenging scenarios like a long horizontal path or strong scintillation lead to high failure rates of the electro-optical systems. Adaptive optics (AO) methods and components developed for astronomical applications cannot fulfill these higher requirements. The so-called Holographic Wavefront Sensor (HWFS) is a promising alternative for measuring the wavefront deformation of a laser beam. The basic elements of the HWFS are a diffraction pattern and a fast photodetector like a photodiode array. With these components the aberrations present in the beam are measured directly. In this paper we present an optical setup to verify two important features of the sensor type experimentally: high measurement speed and the sensor’s response on present scintillation. Measurements with the HWFS were performed at a bandwidth of 11 kHz for a single aberration and of 2.5 kHz for 6 aberrations simultaneously. Furthermore we operated the HWFS in a closed-loop adaptive optics system with a bandwidth of 600 Hz. We show that the wavefront correction based on the HWFS measurements is insensitive to dynamic partial intensity fluctuations of the laser beam.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andreas Zepp, Szymon Gladysz, Rui Barros, Wolfgang Osten, and Karin Stein "Analogue holographic wavefront sensor: a performance analysis", Proc. SPIE 9614, Laser Communication and Propagation through the Atmosphere and Oceans IV, 96140G (4 September 2015); https://doi.org/10.1117/12.2187933
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Holograms

Wavefront sensors

Adaptive optics

Holography

Mirrors

Scintillation

Back to Top